Spray Dryer speed centrifugal nozzle atomizer CSD-3 small spray dryer Centrifugal Atomizer Type Industrial Food Spray

  • Spray Dryer speed centrifugal nozzle atomizer CSD-3 small spray dryer Centrifugal Atomizer Type Industrial Food Spray
Spray Dryer speed centrifugal nozzle atomizer CSD-3 small spray dryer Centrifugal Atomizer Type Industrial Food Spray
  • Wonsen

Centrifugal spray dryer is an air distributor on the top of the drying tower after fresh air is heated into clean hot air through the air
inlet filter and heater, and the hot air enters the drying tower evenly in a spiral shape. The feed fluid is conveyed to the centrifugal
spray or pressure nozzle at the top of the drying tower by the supply pump, and the rotating spray is formed into extremely fine
atomized droplets, which are in contact with the hot air in the downstream, and the moisture evaporates rapidly, and is dried into
finished products in an extremely short time. The finished product is discharged from the bottom of the drying tower and the cyclone separator, and the exhaust air is vented after being purified by the dedusting system.

pharma machinery

Feature

* Standard is with open circuit spray drying system
* Including drying tower, atomizer, electric heater, circulating fan;
* With possibility to replacing rotary atomizer withhigh pressure nozzle
* Loading of raw liquid:3kg/hour
* Finished dry product output:53-2.4kg/h(final capacity depending on the original product)
* need close loop designspray drying system to meet the high content 70% ethanol.
* Water content before drying: 25-50%customized
* Water content after drying:less than 5% customized
* Heating method:Natural gas.
* Air inlet temperature : 100-300℃(adjustable)
Air exhaust temperature : 40℃
* Processing with acid material- formic, propionic, lactic, benzoic, acetic.
* Control system: Siemens 10 inch smart touch screen and PLC control, three levels permissions, can display in English and
Russian , but cannot data output
* Material contact parts: 316L
* Power supply: 3PH/380V/50Hz
pharma equiptment

Why It's Better

1, Adopt rotary cutting air inlet technology and adjustable volute to ensure uniform distribution of materials and no reverse top.
2. The heat source can be electric heating, steam heating or a combination of various heating methods to ensure high efficiency and low consumption.
3, The whole machine is compact and beautiful in structure, easy to operate, the hot air chamber can be disassembled and cleaned, and the inlet air temperature can be adjusted and controlled.
4. Air jacket cooling system is adopted for the drying chamber and top parts to prevent the material from being melted and hung on the chamber.
5, The inner wall of the drying chamber adopts an air rotary blowing device to eliminate or reduce the sticking phenomenon.
6, The powder collecting system adopts dehumidification air blowing cooling technology to cool the product and prevent moisture absorption and
agglomeration.
7, The closed-loop system uses nitrogen as the carrier to transfer heat and is used in a closed cycle, especially for oxidizable, flammable, explosive and harmful solvents, and realizes zero solvent discharge.
8, It has pressure and oxygen content on-line monitoring (closed-loop) and self-diagnosis control functions to ensure the safety of the drying process and has a high degree of intelligent control.
9, It with GMP production requirements, dry air cleanliness is better than 100,000 grades, easy to clean, and product quality is stable.


Wonsen equipment pass CE certificates
Wonsen equipment pass CE certificates
Wonsen equipment pass TUV certificate of Alibaba
Wonsen equipment pass TUV certificate of Alibaba
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right